Back

Printable Spec Sheet

Submittal Sheets

Parts and Rough-In

Technical Notes

2006 Price Guide

Woodford Reps

**You must have Adobe Acrobat Reader to view and print the above spec sheet. Click the icon below for a  free copy of Acrobat Reader

 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 Round Box Series

Model RB65 and RB67

The Woodford Round Box Series is designed especially for use with tilt-up wall construction. A round box and door is combined with a Model 65 or 67 wall hydrant for easy installation

Made in the U.S.A.

Specifications
Brass round box and door fits through standard 6" diameter cored hole.
Chrome finish standard.
Hydrants drain automatically as handle shut-off, even if hose is attached.
Permanent type brass valve body with hemispherical seating surface.
One piece valve plunger accurately controls both flow and drainage with a minimum number of turns and without need for adjustments.
Drain is located under nozzle away from hands of operator.
Tee Key operates hydrant and door.
Two 3/8" -16 tapped holes in back of box provides for anchoring to wall.
For hydrant specifications: Model 65  --  Model 67

This product is tested and listed to an ASSE standard. The standard states that this product is not intended to be used for continuous use

Please contact your authorized Woodford Representative 

for information on placing an order.

Specify model number, inlet wall thickness and finish